The question to answer during the next drop

When it happens, before you restart anything, try to open your router's admin page — usually 192.168.0.1 or 192.168.1.1 in a browser. The exact address is printed on a sticker on the router.

This single check saves people from spending a weekend changing Wi-Fi channels when their broadband line is the thing failing — or from arguing with their provider, who tests the line, finds it perfect, and closes the ticket.

A useful second data point: does a wired device drop at the same moment? If a computer on an Ethernet cable keeps working while Wi-Fi devices fall off, that's conclusively the wireless side. If everything drops together, it's the line or the router itself.

Band steering flapping

Most routers broadcast 2.4 GHz and 5 GHz under a single network name and try to move devices to whichever is better. When your device sits at the boundary where both look roughly equal, the router and the device can end up handing it back and forth — and each handover is a brief disconnection.

The signature: drops happen in one particular room, roughly regularly, and last only a few seconds. Working right next to the router is fine; so is being far away. It's the middle distance that breaks.

Fix: split the bands into two separate network names in your router settings (for example "Home" and "Home-5G") and connect the problem device to one deliberately. It's less tidy and far more stable.

Roaming between mesh nodes or extenders

Same problem, different cause. Devices are notoriously reluctant to let go of a node they've connected to, so a laptop carried across the house can cling to the far node until the signal is unusable, drop, then reconnect. If you have extenders with their own separate network names, this gets much worse, because there's no coordinated handover at all.

Fix: give mesh nodes the same network name and let the system handle roaming; if you're using cheap extenders with separate names, that's the root cause and a proper mesh system is the real answer. Also check the backhaul — a mesh node placed too far from the main router will drop everything connected to it whenever its own link stutters.

Power saving on the device's Wi-Fi adapter

This is a leading cause on Windows laptops specifically, and it's a two-minute fix:

The signature here: it drops when the laptop has been sitting untouched for a while, and reconnects the moment you touch the trackpad.

Signal that's genuinely too weak

A connection at the edge of usable range doesn't degrade gracefully — it works, then abruptly doesn't. If drops correlate with where you are rather than when, this is it. Router placement is the highest-value fix and it's free: central, out in the open, raised off the floor, away from metal and water. Our Wi-Fi speed guide covers placement and coverage in detail.

Too many devices

Consumer routers have limits, and a modern home with phones, laptops, TVs, speakers, plugs, bulbs, and a doorbell can genuinely exceed what an older router handles well. The signature: it got worse over months as you added things, and it's worse in the evening when everyone's home. Rebooting helps for a day or two, then it returns — that pattern points strongly at the router running out of capacity.

The 5 GHz cause nobody mentions

Parts of the 5 GHz band are shared with weather and aviation radar. Routers using those channels are legally required to run DFS — dynamic frequency selection — which means: if the router thinks it detects radar, it must immediately vacate the channel. Devices get disconnected, and the router then stays off that channel for a period (often around 30 minutes) while it finds a new one.

The signature is distinctive: all 5 GHz devices drop at exactly the same instant, 2.4 GHz devices are unaffected, it takes a minute or more to come back, and it seems entirely random. If you live near an airport, a coastal radar station, or a weather facility, this is a strong candidate.

Fix: in your router's 5 GHz settings, set the channel manually to one of the non-DFS channels — typically the lower group starting at 36, or the upper group around 149 and above, depending on your country's regulations. Your router usually marks DFS channels, or refuses to let you pick them manually. Avoiding them entirely removes this failure mode.

If the internet is dropping

Your Wi-Fi is fine; the connection beyond the router is failing.

If it's only one device

Everything else stays connected while one laptop or phone keeps falling off. Stop investigating the network.

What the timing tells you

When it dropsMost likely cause
In one specific room onlyWeak signal, or band steering flapping at the boundary
After the laptop sits idleAdapter power saving
All 5 GHz devices at once, ~30 min outageDFS radar event — change to a non-DFS channel
Every evening, gets worse over the nightNeighbourhood congestion, or router capacity
When the microwave runs2.4 GHz interference — move devices to 5 GHz
Every few days, fixed by a rebootRouter memory leak or overheating — see below
Wired devices drop tooThe line or the router, not Wi-Fi
Started on a specific dateA firmware update, a new device, or a neighbour's new router

When the router itself is the problem

If a reboot reliably fixes it for a day or two and then it returns, the router is failing in one of two ordinary ways.

Two things worth knowing before you buy anything: if your provider supplied the router, they will usually replace a faulty one at no cost — ask, with your logged drop times in hand. And if you replace it yourself, a mesh system solves coverage-related drops far more reliably than a single more expensive router.

The short version

During the next drop, try to load your router's admin page. It loads → the line is dropping, not your Wi-Fi; log the times and check the modem's sync light. It doesn't → the wireless link is dropping; split your 2.4 and 5 GHz networks, turn off adapter power saving on laptops, and if all your 5 GHz devices drop simultaneously for half an hour, move off the DFS channels.